Solar-Controller SCDplus IVT 48 V, 40 A mit Display

Battery system voltage 48 V
Supported battery types Lead-acid, lead-gel,lead-AGM, LiFePO4
Type of charge control PWM serial
Maximum panel power 1920 W
Maximum panel voltage 90 V
Maximum panel/charging current 40 A
Maximum load current 40 A
Internal current consumption, active 50 mA
Internal current consumption, standby < 10 mA
Fuse 40 A
Reverse polarity protection battery input Yes
Reverse polarity protection solar input Yes
Overcurrent protection load output Yes
Temperature sensor Yes (external) 1.5 m
Operation temperature range -20 °C to +60 °C
Maximum efficiency 98 %
Common ground potential
(negative pole) Yes
Switchable load output Yes
Software control Yes
PC interface USB (Type B)
Display LCD display +
LED
Housing Plastic
Dimensions (L x W x H) 190 x 105 x 55 mm
Weight 540 g
Charging parameters
Cut-off voltage, lead-acid 56.0 V
Cut-off voltage, lead-gel 56.4 V
Cut-off voltage, lead-AGM 58.8 V
Cut-off voltage, LiFePO4 56.8 V
Trickle charging, lead-acid/lead-gel 54.8 V
Trickle charging, lead-AGM/LiFePO4 55.2 V
Temperature compensation, minimum 100 mV/K
Temperature compensation, medium 120 mV/K
Temperature compensation, maximum 140 mV/K
Deep discharge protection load output
Shut-off voltage, factory setting 42 V
Shut-off voltage, adjustable range* 40 V – 44 V
Reset voltage, factory setting 48 V
Reset voltage, adjustable range 46 V – 50 V