my-PV screw-in heater 3kW heating element
Technical data
Max. power: 3000W
Heating power: 0-3000W when controlled by AC-THOR, AC-THOR 9s or SOL-THOR
Mains connection: 1-phase, protective contact plug, 230V
Frequency range: 50Hz
Max. operating pressure: 10 bar
Tightening torque: 60Nm
Connection cable: 2.8 m
Heating cartridge connection: G1 1/2 inch
Heat-free zone: 130 mm from sealing surface
Safety temperature limiter: Approx. 98°C
Target temperature range: approx. 34-78°C
Operating temperature range: Ambient temperature at the housing must not exceed 35°C
Protection class: IP45
Weight: 1.65 kg
Dimensions: 88 x 88 x 518 mm
With the 3kW screw-in heating element from my-PV (MPN: 20-0500), you can profitably use your PV electricity and generate hot water with the AC-THOR and SOL-THOR power managers AC-THOR 9s and SOL-THOR power managers. They control the heating elements continuously and simultaneously adjust the output precisely to the available solar energy surplusthe heating cartridges are ideal for installation in fresh water and buffer storage tanks and, thanks to their special design, offer an exceptionally long service life. They are also equipped with an integrated safety temperature limiter. For applications where higher temperatures are required, such as above 90°C in the buffer tank, we also offer models without a thermostat.
about the screw-in heating element
Hot water production using solar power
Heating output from 0-3000W
With manually adjustable target temperature
1.5-inch standard thread
Heating support
single-phase
Infinitely adjustable with the AC-THOR & AC-THOR 9s
You can conveniently set your desired hot water temperature using the rotary knob. The two power managers automatically detect when the temperature has been reached and switch to standby mode.
Self-sufficient PV heating – continuously regulated by SOL-THOR
The 3kW screw-in heating element is also compatible with SOL-THOR. You can set the desired temperature directly using a rotary knob. A safety temperature limiter is already integrated. For higher temperatures, heating rods without a thermostat are available, but also with a safety temperature limiter. In such cases, the temperature sensor included with the SOL-THOR must be used to stop the heating process. Important: You can remove the safety plug from the 3kW
